Hi,
we are not asking for the SAP joblog, but for the OS joblog as Brian already stated ... and we would need the information for the WP in the source system, as the problem arises there ...
Regards,
Volker Gueldenpfennig, consolut international ag
↧
Re: Database error -901 at OPC
↧
Re: Secondary indexes suddenly missing in DSPDBR
Hi Mark,
that sounds like an OS bug ;-(
Obviously, the DSPDBR reports: NONE
But, DSPFD on "MARA+A" reports MARA ... that is totally wrong and I never saw it.
Please open a PMR at IBM, if this is the case ...
Regards,
Volker Gueldenpfennig, consolut international ag
↧
↧
Re: Database error -901 at OPC
Hi Brian and Volker,
Sorry for late reply. Please find OS job log below.
The job failed again with same error:
01:06:08 BTC 021 100 RFC_SERVICE BY 2 Database error -901 at OPC
01:06:08 BTC 021 100 RFC_SERVICE BY 0 > SQL system error. MSGID= Job=188483/SCP54/WP21
01:06:08 BTC 021 100 RFC_SERVICE BY 1 Database error -901
OS job log for WP21:
C sqlcode: -901
C sqlerrd[2]: 0
C sqlerrd[4]: 0
C sqlerrml: 11, sqlerrmc:
C C3D7C6FF0F400 0003
C *** ERROR => ds_dbsl_funs.beg_read returned 99.
[dbdssl.cpp 751]
C {root-id=53F97E8BA480A794001C0A86E01}_{conn-id=00000000000000000000000000000000}_0
C Database error. DBSL return code 99
B ***LOG BY2=> sql error -901 performing OPC [dbds 398]
B ***LOG BY0=> SQL system error. MSGID= Job=188483/SCP54/WP21 [dbds 398]
B ***LOG BY1=> sql error -901 [dbacds 1496]
↧
Re: BW External DB connect to an IBM i (AS400) system
Hi Volker,
We got the SAP HOST Agent installed on IBNM I host and started the XDN listener Job, its listing to Port 963.
But still no Luck.
Getting Same Error. I restart our SAP instance and also the hostAgent on the SAP side.
We also asked our IBMi team to restart the SAP Host Agent.
Exact Same Error. And our Network Team setup a traffic monitoring between SAP to IBM and he is saying no traffic is coming from SAP to the IBMi server
Error:
B Mon Aug 25 15:41:25 2014
B Loading DB library 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' ...
B Library 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' loaded
B Version of 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' is "741.10", patchlevel (0.41)
N RSecSSFs: Configuration value "rsec/ssfs_datapath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_DATAPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5708]
N RSecSSFs: Configuration value "rsec/ssfs_keypath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_KEYPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5717]
N RSecSSFs: Reverting overwriting of profile by different environment (disabled in dw) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5727]
N RSecSSFs: Configuration value "rsec/ssfs_datapath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_DATAPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5708]
N RSecSSFs: Configuration value "rsec/ssfs_keypath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_KEYPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5717]
N RSecSSFs: Reverting overwriting of profile by different environment (disabled in dw) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5727]
B Connect to BWAS400DEV as KTSAPUSR with AS4_HOST=DVTEST;AS4_DB_LIBRARY=KTSAPUSR
C DB4 SQL Reparse Activated
C Windows 2008 R2 - XDN Default
C XDN-Port: Assuming 9600 + sapmsSB1 mod 100 = 9601
C Secondary DB connect, user KTSAPUSR
C Environment: AS4_HOST=DVTEST;AS4_DB_LIBRARY=KTSAPUSR
C *** ERROR => EXEC SQL connect: AS4_DB_LIBRARY invalid
[dbsldb4.cpp 18043]
C {root-id=005056810E3C1ED48B930260998960CF}_{conn-id=00000000000000000000000000000000}_0
C *** ERROR => CPDA0FF occured: XDNXDAAPI:BuildTCPConnection: Can't Connect to:.
[dbsldb4dbi.c 502]
We also Removed AS4_DB_LIBRARY from DBCO configuration to see what happen and we got this error
B Mon Aug 25 15:52:54 2014
B Loading DB library 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' ...
B Library 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' loaded
B Version of 'F:\usr\sap\SB1\DVEBMGS00\exe\dbdb4slib.dll' is "741.10", patchlevel (0.41)
N RSecSSFs: Configuration value "rsec/ssfs_datapath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_DATAPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5708]
N RSecSSFs: Configuration value "rsec/ssfs_keypath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_KEYPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5717]
N RSecSSFs: Reverting overwriting of profile by different environment (disabled in dw) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5727]
N RSecSSFs: Configuration value "rsec/ssfs_datapath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_DATAPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5708]
N RSecSSFs: Configuration value "rsec/ssfs_keypath" from profile explicitly overwritten by different value in environment variable RSEC_SSFS_KEYPATH [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5717]
N RSecSSFs: Reverting overwriting of profile by different environment (disabled in dw) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 5727]
B Connect to BWAS400DEV as KTSAPUSR with AS4_HOST=DVTEST
C DB4 SQL Reparse Activated
C Windows 2008 R2 - XDN Default
C XDN-Port: Assuming 9600 + sapmsSB1 mod 100 = 9601
C Secondary DB connect, user KTSAPUSR
C Environment: AS4_HOST=DVTEST
C *** ERROR => EXEC SQL connect: AS4_HOST invalid
[dbsldb4.cpp 17979]
C {root-id=005056810E3C1ED48B930260998960CF}_{conn-id=00000000000000000000000000000000}_0
C *** ERROR => CPDA0FF occured: XDNXDAAPI:BuildTCPConnection: Can't Connect to:.
[dbsldb4dbi.c 502]
Not sure why the traffic is not going.
We have a Direct SAPSQL connection using DBCO and that one is working perfectly.
Any suggestion what next.
↧
Re: BW External DB connect to an IBM i (AS400) system
Hi Brajendra,
AS4_HOST and AS4_DB_LIBRARY are mandatory parameters. Make sure that the value you specify with AS4_DB_LIBRARY is an existing library on the IBM i system. A library is similar to a database schema. (Above I think I have seen that you have set it ot the name of the connect user, which might not necessarily be right.)
Best regards,
Dorothea
↧
↧
Re: Database error -901 at OPC
Hi,
the messages you are posting are also taken from the SAP system (syslog, developer trace), they only show the SQL0901 error itself.
In order to see the error that caused the SQL0901, please log on to the IBM i at OS level and use the command Brian posted above, or directly
DSPJOBLOG JOB(188483/SCP54/WP21)
The last three or four messages prior to the SQL0901 will be relevant.
If that job (188483/SCP54/WP21) does not exist anymore, you can get the job in which the error occured from the SAP logs you cited above.
Best regards,
Dorothea
↧
Re: BW External DB connect to an IBM i (AS400) system
silly mistake or not I can say not know requirement, I was missing a semicolon(;) at the end of my configuration parameters in DBCO
Connection Information - AS4_HOST=DVTEST;AS4_DB_LIBRARY=SAPUSR;
After add the semicolon then tested the connection via SE38-ADBC_TEST_CONNECTION - Select the -Database connection - BWAS400DEV and tested the connection and it successful.
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hi Patrick,
in addition to what Daniel says, please check the JDBC driver version you are using, e.g. using the following command being called from within the driver directory:
java -cp jt400.jar utilities.AboutToolbox
SAP note 654800 has the details. Like Daniel says, this error hasn't occurred for a long time, so I almost assume that it got newly introduced, likely by PTF or JDBC driver. (It could also be the SAP installation code, but I'd expect to see a different exception.)
It would be interesting to know if an older driver version fixes the problem.
Best regards,
Dorothea
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hello Dorothea,
I'm using following JDBC driver:
IBM Toolbox for Java
Open Source Software, JTOpen 8.3, codebase 5770-SS1 V7R2M0.00 built=20140801@L17
Supports JDBC version 4.0
Toolbox driver version 10.3
Installation of an ABAP Netweaver 7.4 system was working without problem (same SWPM, JDBC, Kernel, ...).
Best Regards
Patrick
↧
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hello Patrick,
8.3 is the newest version from August. Please try JTOpen 8.1, or even JTOpen 7.8 if you are still using IBM i 7.1 or 6.1 as a database server.
In parallel, we'll try to reproduce the problem with 8.3...
Best regards,
Dorothea
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hello Dorothea,
I will now use JTOpen 7.8.
Unfortunately I got the error at the step "Install common system files":
Last error reported by the step Caught ESAPinstException in module call: Command CRTR3SYS SID(XJD) GLOBALHOST(*LOCAL* NUCUC(*YES) failed. Return: 65280;CPD0160: Programm CMDMAINQ in Bibliothek *LIBL nicht gefunden.;CPF0006: Im Befehl ist ein Fehler aufgetreten
Could you help me with this as well?
Best Regards
Patrick
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hi Patrick,
I just confirmed th problem does exists with JTOpen 8.3, and by replacing the jt400.jar file in the /sapmnt/SID/jdbc/tbx folder you can retry and overcome this issue. You can try this if you still haven't get rid of the initial installation and then you delete the new system.
If you need the new install, then I think you might have a problem with the recreate of the kernel library SAPXJDIND. Can you check if it exists and if it is empty? - WRKJOB SAPXJDIND/*ALL- This is my guess... if so, you might need to completely delete the library -DLTLIB SAPXJDIND- and let the SAPILED deamon job recreate a new one before retrying SAPInst
Regards,
Luis Gonzalez
SAP on IBM i Installation
↧
Restore ABAP side of dual stack
Hi
Been 4 years + since I did any work on I-series. After patch of BW 7.01 ABAP side SPS6 to 16 using SPAM I tried to use JSPM to patch Java side.
System didn't allow this after patching JSPM to level 16 so was forced to use SUM. Note 1881524 suggests you can't update java side separately so need to start again. Kernel was updated to 7.20 from 7.01 after patching ABAP side.
Is it sufficient to restore r3sidDATA library and then continue with SUM ?
I'm also currently converting to new user concept per note 1149318 as a pre-req to using SUM.
Advise appreciated.
Regards
Dave
↧
↧
Re: Restore ABAP side of dual stack
Hi David,
Is it sufficient to restore r3sidDATA library and then continue with SUM ?
As per my understanding it should be good enough to restore R3<SID>DATA library and then start the patching using SUM. Post restore please check whether configtool connects to DB and visual admin works fine.
Regards,
Deepak Kori
↧
Re: Restore ABAP side of dual stack
Hi Dave,
According to note 1149318, you could try to update the ABAP stack to a next available patch level
together with JAVA. And this can avoid the restore. If you just want to keep ABAP at 16, you have
to do the restore.
It is enough to restore R3<SID>DATA library, and please delete all the sql packages after that.
About SUM, please make sure you have switched to new user concept and 720 kernel before start
it.
Regards
Daniel
SAP on IBM i Team
↧
Re: Kernel Upgrade in IBM AS400 and DB2
Hi Jana,
I think the steps from Volker is good enough for you.
You can also refer to the following sap notes for study.
1632755 IBM i: Description of command APYSIDKRN
1432807 IBM i: Applying a saved kernel using APYSIDKRN
1636252 Installing a 7.20 kernel in SAP Web AS 7.00/7.01/7.10/7.11
There is a course called ADM 525 SAP NetWeaver on IBM i:Database Administration in
SAP, it would be useful for you if could take part in it.
Regards
Daniel
SAP on IBM i Team
↧
Re: SAP Installation Error "[SQL0423] Locator *N not valid."
Hello Luis Gonzalez,
I have now successfully installed the SAP system with JTOpen 7.8.
Thank you for you help.
Best Regards
Patrick
↧
↧
Re: New V5R4 enhancements for SQL performance and tuning
Dear Satid,
Please be informed that the first 3 links are broken : I would be grateful if you would post the latest correct ones.
Thanks.
Reda
↧
Re: New V5R4 enhancements for SQL performance and tuning
Reda
Here are useful links on this subject :
System-wide Index Advisor and Condenser: Simplify DB2 for i5/OS index advice
DB2 for i SQL Workload Performance Excellence: http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/PRS5169
Presentation on V5R4 Index Advisor and Condenser : This one is dropped out and I have no chance to re-upload it yet. Send me an e-mail to satid (at) th (dot) ibm (dot) com and I will pass it to you. The file is around 3 MB. If you mail system has mail attachment size limit, let me know and I will upload it for you to download on some free file upload web site.
↧
Re: New V5R4 enhancements for SQL performance and tuning
Dear Satid,
Thank you very much.
I've sent you an e-mail.
Best regards.
Reda
↧